Huawei Quidway S3900 Series - Display Ip Routing-Table Radix

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Static Route Configuration
Commands
Huawei Technologies Proprietary
1-11
210.0.0.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
# Display the static routing table.
<Quidway> display ip routing-table protocol static
STATIC Routing tables:
Summary count: 1
STATIC Routing tables status:<active>:
Summary count: 0
STATIC Routing tables status:<inactive>:
Summary count: 1
Destination/Mask Protocol Pre Cost Nexthop Interface
1.2.3.0/24 STATIC 60 0 1.2.4.5 Vlan-interface10
For detailed description of the output information, see Table 1-1.
1.1.7 display ip routing-table radix
Syntax
display ip routing-table radix
View
Any view
Parameter
None
Description
Use the display ip routing-table radix command to display the route information in a
tree structure.
Example
<Quidway> display ip routing-table radix
Radix tree for INET (2) inodes 7 routes 5:
+-32+--{210.0.0.1
+--0+
| | +--8+--{127.0.0.0
| | | +-32+--{127.0.0.1
| +--1+
| +--8+--{20.0.0.0
| +-32+--{20.1.1.1