New Feature Manual - DHCP
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 DHCP Server Configuration
Commands
Huawei Technologies Proprietary
1-34
all: Specifies all configured gateway IP addresses.
Description
Use the gateway-list command to configure one or multiple gateway IP addresses for
the DHCP clients of a DHCP address pool.
Use the undo gateway-list command to remove one or all the configured gateway IP
addresses configured for the DHCP address pool.
By default, no gateway IP address is configured.
If you execute the gateway-list command repeatedly, the new configuration
overwrites the previous one.
Example
# Enter system view.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
# Configure the gateway IP address 10.110.1.99 for the global DHCP address pool 0.
[Quidway] dhcp server ip-pool 0
[Quidway-dhcp-pool-0] gateway-list 10.110.1.99
1.1.30 nbns-list
Syntax
nbns-list ip-address&<1-8>
undo nbns-list { ip-address | all }
View
DHCP address pool view
Parameter
ip-address&<1-8>: IP address of a NetBIOS server. &<1-8> means you can provide up
to eight NetBIOS server IP addresses. When inputting more than one IP address,
separate two neighboring IP addresses with a space.
all: Specifies all configured NetBIOS server IP addresses.
Description
Use the nbns-list command to configure one or multiple NetBIOS server IP addresses
for the DHCP clients of a global DHCP address pool.
Use the undo nbns-list command to remove one or all NetBIOS server IP addresses
configured for the DHCP clients.
By default, no NetBIOS server IP address is configured.
To Next Page
Loading...
Need help?
General