Huawei Quidway S3900 Series Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 2 EAD Configuration Commands
Huawei Technologies Proprietary
2-1
Chapter 2 EAD Configuration Commands
2.1 EAD Configuration Commands
2.1.1 security-policy-server
Syntax
security-policy-server ip-address
undo security-policy-server [ ip-address | all ]
View
RADIUS scheme view
Parameter
ip-address: IP address of the security policy server.
all: All IP addresses of security policy servers.
Description
Use the security-policy-server command to specify an IP address for a security
policy server.
Use the undo security-policy-server command to delete the specified IP address.
You may specify up to eight security policy servers in a RADIUS scheme.
Each RADIUS scheme supports at most eight IP addresses of security policy servers.
The switch only responds to the session control packets coming from the
authentication server and security policy server.
Example
# Set the IP address of the security policy server to 192.168.0.1.
<Quidway>system-view
System View: return to User View with Ctrl+Z.
[Quidway] radius scheme Quidway
[Quidway-radius-Quidway] security-policy-server 192.168.0.1
[Quidway-radius-Quidway] display current-configuration
…
radius scheme Quidway
primary authentication 1.1.11.29 1812
secondary authentication 127.0.0.1 1645
security-policy-server 192.168.0.1

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English