Huawei Quidway S3900 Series - Display Cpu; Display Device

Command Manual – System Maintenance and Debugging
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 3 Device Management Commands
Huawei Technologies Proprietary
3-3
Field Description
The backup boot app is Backup boot file of the system
3.1.4 display cpu
Syntax
display cpu [ unit unit-id ]
View
Any view
Parameter
unit-id: Unit ID of a switch.
Description
Use the display cpu command to display the CPU usage of a specified switch.
Example
# Display the CPU usage of this switch.
<Quidway> display cpu
Unit 1
Board 0 CPU busy status:
12% in last 5 seconds
12% in last 1 minute
12% in last 5 minutes
Table 3-2 Description on the fields of the display cpu command
Field Description
CPU busy status
Indicates that the following lines describe the CPU
occupancies in different time periods.
12% in last 5 seconds
12% in last 1 minute
12% in last 5 minutes
The CPU usage in the last five seconds is 12%.
The CPU usage in the last one minute is 12%.
The CPU usage in the last five minutes is 12%.
3.1.5 display device
Syntax
display device [ manuinfo [ unit unit-id ] | unit unit-id ]