Huawei Quidway S3900 Series Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
Huawei Technologies Proprietary
1-31
Description
Use the data-flow-format command to set the units of measure for data flows sent to
RADIUS servers.
Use the undo data-flow-format command to restore the default units of measure.
By default, the unit of measure for data is byte and that for packets is one-packet.
Related command: display radius scheme.
Example
# Specify to measure data and packets in data flows sent to RADIUS server in
kilobytes and kilo-packets respectively.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] radius scheme radius1
New Radius scheme
[Quidway-radius-radius1] data-flow-format data kilo-byte packet kilo-packet
1.2.4 display local-server statistics
Syntax
display local-server statistics
View
Any view
Parameter
None
Description
Use the display local-server statistics command to display the statistics about all
local RADIUS authentication servers.
Related command: local-server.
Example
# Display the statistics about local RADIUS authentication server.
<Quidway> display local-server statistics
On Unit 1:
The localserver packet statistics:
Receive: 30 Send: 30
Discard: 0 Receive Packet Error: 0
Auth Receive: 10 Auth Send: 10

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English