New Feature Manual - DHCP
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 DHCP Server Configuration
Commands
Huawei Technologies Proprietary
1-14
Parameter
ip-address&<1-8>: IP address of a NetBIOS server. &<1-8> means you can provide up
to eight NetBIOS server IP addresses. When inputting more than one NetBIOS server
IP address, separate two neighboring IP addresses with a space.
interface interface-type interface-number [ to interface-type interface-number ]:
Specifies the interface(s), through which you can specify the corresponding interface
address pool(s).
all: (In comparison with the ip-address argument) Specifies all NetBIOS server IP
addresses.
all: (In comparison with the interface keyword) Specifies all interface address pools.
Description
Use the dhcp server nbns-list command to configure NetBIOS server IP address(es)
for the specified DHCP interface address pool(s).
Use the undo dhcp server nbns-list command to remove the NetBIOS server IP
address(es) configured for the specified DHCP interface address pool(s).
By default, no NetBIOS server IP address is configured for a DHCP interface address
pool.
If you execute the dhcp server nbns-list command repeatedly, the new configuration
overwrites the previous one.
Related command: nbns-list and dhcp server netbios-type.
Example
# Enter system view.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
# Configure the NetBIOS server IP address 10.12.1.99 for all the DHCP interface
address pools.
[Quidway] dhcp server nbns-list 10.12.1.99 all
1.1.13 dhcp server netbios-type
Syntax
VLAN interface view:
dhcp server netbios-type { b-node | h-node | m-node | p-node }
undo dhcp server netbios-type
System view:
To Next Page
Loading...
Need help?
General