Huawei Quidway S3900 Series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-36
3.1.30 multi-path-number
Syntax
multi-path-number value
View
OSPF view
Parameter
value: Number of equivalent routes, ranging from 1 to 3.
Description
Use the multi-path-number command to set the number of OSPF equivalent routes.
Example
# Set the number of OSPF equivalent routes to 2.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] ospf 1
[Quidway-ospf-1] multi-path-number 2
3.1.31 network
Syntax
network ip-address ip-mask
undo network ip-address ip-mask
View
OSPF Area view
Parameter
ip-address: Address of the network segment where the interface resides.
ip-mask: IP address wildcard shielded text (similar to the complement of the IP address
mask).
Description
Use the network command to enable an interface to run the OSPF protocol.
Use the undo network command to disable an interface from running OSPF.
By default, the interface does not belong to any area.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English