Huawei Quidway S3900 Series Command Manual

Command Manual – Mirroring
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 Mirroring Commands
Huawei Technologies Proprietary
1-9
Example
# Configure GigabitEthernet1/1/1 as the source port and mirror all packets received
and sent via this port.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface GigabitEthernet1/1/1
[Quidway-GigabitEthernet1/1/1] mirroring-port both
1.1.10 monitor-port
Syntax
monitor-port
undo monitor-port
View
Ethernet port view
Parameter
None
Description
Use the monitor-port command to configure the destination port.
Use the undo monitor-port command to remove the configuration of a destination
port.
You can configure only one destination port on the switch; all mirrored packets will be
sent to the destination port.
Related command: display mirroring-group
Example
# Configure GigabitEthernet1/1/4 as the destination port.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface GigabitEthernet1/1/4
[Quidway-GigabitEthernet1/1/4] monitor-port
1.1.11 remote-probe vlan
Syntax
remote-probe vlan enable
undo remote-probe vlan enable

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English