Huawei Quidway S3900 Series Command Manual

Command Manual – PoE & PoE Profile
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 PoE Configuration Commands
Huawei Technologies Proprietary
1-6
<Quidway> display poe powersupply
PSE ID :1
PSE Legacy Detection :disable
PSE Total Power Consumption :12000 mW
PSE Available Power :288000 mW
PSE Peak Value :12000 mW
PSE Average Value :12000 mW
PSE Software Version :290
PSE Hardware Version :000
PSE CPLD Version :021
PSE Power-Management mode :auto
Table 1-3 Description on the fields of the display poe powersupply command
Field Description
PSE ID Identification of the PSE
PSE Legacy Detection
The enabled/disabled status of the nonstandard PD
detection
PSE Total Power
Consumption
Total power consumption of the PSE
PSE Available Power Available power of the PSE
Power Peak Value Peak power value of the PSE
Power Average Value Average power value of the PSE
Power Software Version Version of the PSE software
Power Hardware Version Version of the PSE hardware
PSE CPLD Version
Version of the PSE complex programmable logical
device (CPLD)
PSE Power-Management
mode
PoE management mode on the port when the PSE is
overloaded:
The auto keyword indicates that the auto mode is
adopted, that is, the PoE management mode based
on the PoE priority of the port is adopted
The manual keyword indicates that the manual
mode is adopted in the PoE management on the port
1.1.4 display poe temperature-protection
Syntax
display poe temperature-protection

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English