Huawei Quidway S3900 Series Command Manual

Command Manual – NTP
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 NTP Configuration Commands
Huawei Technologies Proprietary
1-6
View
System view
Parameter
None
Description
Use the ntp-service authentication enable command to enable the NTP
authentication.
Use the undo ntp-service authentication enable command to disable the NTP
authentication.
By default, the NTP authentication is disabled.
Example
# Enable the NTP authentication.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] ntp-service authentication enable
1.1.6 ntp-service authentication-keyid
Syntax
ntp-service authentication-keyid key-id authentication-mode md5 value
undo ntp-service authentication-keyid key-id
View
System view
Parameter
key-id: Authentication key ID, in the range of 1 to 4294967295.
value: Authentication key, a string comprising 1 to 32 characters. Up to 1024 keys can
be configured.
Description
Use the ntp-service authentication-keyid command to configure an NTP
authentication key.
Use the ntp-service authentication-keyid command to remove an NTP
authentication key.
By default, no NTP authentication key is configured.
As for encryption algorithm, only message digest 5 (MD5) is currently supported.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English