Huawei Quidway S3900 Series - Display Sftp Source-Ip

Command Manual –SSH Terminal Service
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 SSH Terminal Service
Configuration Commands
Huawei Technologies Proprietary
1-33
View
SFTP Client view
Parameter
remote-path: Name of the intended directory.
Description
Use the dir command to display the specified directory on the remote SFTP server.
If the remote-path argument is not specified, the files in the current directory are
displayed.
This command has the same function as the ls command.
Example
# Display the files in directory flash:/.
sftp-client> dir flash:/
-rwxrwxrwx 1 noone nogroup 1759 Aug 23 06:52 vrpcfg.cfg
-rwxrwxrwx 1 noone nogroup 225 Aug 24 08:01 pubkey2
-rwxrwxrwx 1 noone nogroup 283 Aug 24 07:39 pubkey1
-rwxrwxrwx 1 noone nogroup 225 Sep 28 08:28 pub1
drwxrwxrwx 1 noone nogroup 0 Sep 28 08:24 new1
drwxrwxrwx 1 noone nogroup 0 Sep 28 08:18 new2
-rwxrwxrwx 1 noone nogroup 225 Sep 28 08:30 pub2
1.4.6 display sftp source-ip
Syntax
display sftp source-ip
View
Any view
Parameter
None
Description
Use the display sftp source-ip command to display the current source IP address
specified for the SFTP Client.
If you specify a source interface for the SFTP Client, the command displays the IP
address of the interface. If not, the command displays 0.0.0.0.