Huawei Quidway S3900 Series Command Manual

Command Manual – IP Address and Performance
Confiugration
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 IP Address Configuration Commands
1-1
Chapter 1 IP Address Configuration Commands
1.1 IP Address Configuration Commands
1.1.1 display ip interface
Syntax
display ip interface [ brief [ interface-type [ interface-number ] ] | [ interface-type
interface-number ] ]
View
Any view
Parameter
interface-type interface-number: interface-type indicates a interface type and
interface-number indicates a interface number. For details, see the description of the
interface command in Port Basic Configuration Command Manual.
brief: Displays the basic interface configuration information.
Description
Use the display ip interface command to display information about one specific or all
interfaces.
Example
# Display information about VLAN interface 1.
<Quidway>display ip interface Vlan-interface 1
Vlan-interface1 current state :UP
Line protocol current state :UP
Internet Address is 192.168.0.39/24 Primary
Broadcast address : 192.168.0.255
The Maximum Transmit Unit : 1500 bytes
IP packets input number: 9678, bytes: 475001, multicasts: 7
IP packets output number: 8622, bytes: 391084, multicasts: 0
TTL invalid packet number: 0
ICMP packet input number: 0
Echo reply: 0
Unreachable: 0
Source quench: 0
Routing redirect: 0
Echo request: 0

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English