Huawei Quidway S3900 Series - Timer Quiet

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
Huawei Technologies Proprietary
1-57
z Appropriately setting the timeout time of this timer according to the network
situation can improve the performance of the system.
z The timer command has the same effect with the timer response-timeout
command.
Related command: radius scheme and retry.
Example
# Set the timeout time of the response timeout timer for the RADIUS scheme radius1
to 5 seconds.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] radius scheme radius1
New Radius scheme
[Quidway-radius-radius1] timer 5
1.2.29 timer quiet
Syntax
timer quiet minutes
undo timer quiet
View
RADIUS scheme view
Parameter
minutes: Wait time, ranging from 1 minute to 255 minutes. By default, it is 5 minutes.
Description
Use the timer quiet command to set the wait time for the primary server to restore the
active state.
Use the undo timer quiet command to restore the default wait time.
By default, the primary server waits five minutes before restoring the active state.
Related command: display radius scheme.
Example
# Set the wait time for the primary server to restore the active state to 10 minutes.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] radius scheme radius1
New Radius scheme
[Quidway-radius-radius1] timer quiet 10