Huawei Quidway S3900 Series Command Manual

Command Manual – System Maintenance and Debugging
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Basic System Configuration & De
bugging Commands
Huawei Technologies Proprietary
1-3
View
User view
Parameter
zone-name: Name of the time zone, in length of 1 to 32 characters.
add: Sets the time zone to a time before the UTC time.
minus: Sets the time zone to a time behind the UTC time.
HH:MM:SS: Time to be subtracted from the UTC time, in the form of HH:MM:SS.
Description
Use the clock timezone command to set the local time zone.
Use the undo clock timezone command to restore the local time zone to the default
UTC (universal time coordinated) time zone.
After the setting, you can use the display clock command to check the results. The log
information time and the debug information time adopts the local time that has been
adjusted by the time zone and the summer time.
Related command: clock summer-time and display clock.
Example
# Set the local time zone named z5, which is five hours ahead of the UTC time.
<Quidway> clock timezone z5 add 05:00:00
1.1.4 language-mode
Syntax
language-mode { chinese | english }
View
User view
Parameter
chinese: Sets the CLI language environment to Chinese.
English: Sets the CLI language environment to English.
Description
Use the language-mode command to toggle between the language modes (that is,
language environments) of the command line interface (CLI) to meet your requirement.
By default, the CLI language mode is english.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English