Huawei Quidway S3900 Series - Display Hwping

Command Manual - HWPing
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 HWPing Commands
Huawei Technologies Proprietary
1-2
View
HWPing test group view
Parameter
ip-address: Destination IP address in a test.
Description
Use the destination-ip command to configure the destination IP address in the test.
Use the undo destination-ip command to delete the configured destination IP
address.
By default, no destination IP address is configured for any test.
Example
# Set the destination IP address in the test of the “administrator-icmp” test group to
1.1.1.99.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] hwping administrator icmp
[Quidway-hwping-administrator-icmp] destination-ip 1.1.1.99
1.1.3 display hwping
Syntax
display hwping { results | history } [ administrator-name operation-tag ]
View
Any view
Parameter
results: Displays the test result.
history: Displays the test history.
administrator-name: Name of the administrator creating the test.
operation-tag: Test operation tag.
Description
Use the display hwping command to view test result(s).
If a test group is specified using the arguments of administrator-name and
test-operation-tag, the system displays only the test result of the group; if not, it
displays the test results of all the test groups.
Related command: test-enable.