Huawei Quidway S3900 Series Command Manual

Command Manual – Auto Detect
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 Auto Detect Configuration Commands
Huawei Technologies Proprietary
1-5
1.1.5 retry
Syntax
retry retry-times
View
Detecting group view
Parameter
retry-times: Retry times during a detect operation. This argument ranges from 0 to 10
and defaults to 2.
Description
Use the retry command to set the maximum retry times during a detect operation.
Example
# Specify the maximum number of retires to 3 for detecting group 10.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] detect-group 10
[Quidway-detect-group-10] retry 3
1.1.6 timer loop
Syntax
timer loop seconds
View
Detecting group view
Parameter
seconds: Detecting interval. This argument ranges form 1 to 86,400 (in seconds) and
defaults to 15.
Description
Use the timer loop command to set the detecting interval, that is, the frequency to
perform auto detect operations.
Example
# Set the detecting interval to 60 seconds for detecting group 10.
<Quidway> system-view

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English