Huawei Quidway S3900 Series - Mirroring-Port

Command Manual – Mirroring
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 Mirroring Commands
Huawei Technologies Proprietary
1-8
undo mirroring-group group-id remote-probe vlan remote-probe-vlan-id
View
System view
Parameter
group-id: Group number of a port mirroring group, in the range of 1 to 20.
remote-probe vlan remote-probe-vlan-id: Specifies the remote-probe VLAN for the
mirroring group.
Description
Use the mirroring-group remote-probe vlan command to specify the remote-probe
VLAN for a mirroring group.
Use the undo mirroring-group remote-probe vlan command to remove the
configuration of remote-probe VLAN for a mirroring group.
Example
# Configure VLAN 100 as the remote-probe VLAN.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] mirroring-group 1 remote-probe vlan 100
1.1.9 mirroring-port
Syntax
mirroring-port { inbound | outbound | both }
undo mirroring-port
View
Ethernet port view
Parameter
inbound | outbound | both: Direction of mirrored packets. inbound: only mirrors the
packets received via the port; outbound: only mirrors the packets sent by the port;
both: mirrors all packets received and sent by the port.
Description
Use the mirroring-port command to configure a source port.
Use the undo mirroring-port command to remove the configuration of a source port.
Related command: display mirroring-group