Huawei Quidway S3900 Series - Reset Pim Routing-Table

Command Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 6 PIM Configuration Commands
Huawei Technologies Proprietary
6-17
View
User view
Parameter
all: All PIM neighbors
neighbor-address: Specifies neighbor address.
interface interface-type interface-number: Specifies VLAN interface.
Description
Use the reset pim neighbor command to clear all PIM neighbors or PIM neighbors on
the specified VLAN interface.
Related command: display pim neighbor.
Example
# Clear the PIM neighbor 25.5.4.3.
<Quidway> reset pim neighbor 25.5.4.3
6.1.19 reset pim routing-table
Syntax
reset pim routing-table { all | { group-address [ mask group-mask | mask-length
group-mask-length ] | source-address [ mask source-mask | mask-length
source-mask-length ] | { incoming-interface interface-type interface-number } } * }
View
User view
Parameter
all: All PIM neighbors
group-address: Specifies group address.
mask group-mask: Specifies group mask.
group-mask-length: Specifies mask length of the group address.
source-address: Specifies source address.
mask source-mask: Specifies source mask.
source-mask-length: Specifies mask length of the group address.
incoming-interface: Specifies incoming interface for the route entry in PIM routing
table.
interface-type interface-number: Specifies the VLAN interface.