Huawei Quidway S3900 Series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-12
IA 2.2.2.2 0.0.0.0 10 10.153.17.89 Vlan-interface1
Table 3-1 Description on the fields of the display ospf abr-asbr command
Field Description
Destination Router ID of the ABR or ASBR
Area
Area where the router is connected to
the ASBR
Cost Routing overhead value of the route
Nexthop Nexthop address to the destination
Interface Local output interface
3.1.14 display ospf asbr-summary
Syntax
display ospf [ process-id ] asbr-summary [ ip-address mask ]
View
Any view
Parameter
process-id: OSPF Process ID. If you do not specify a process ID, this command applies
to all current OSPF processes.
ip-address: Matched IP address, in dotted decimal notation.
mask: IP address mask, in dotted decimal notation.
Description
Use the display ospf asbr-summary command to display the summary information of
OSPF imported route.
If you do not specify an IP address or mask, the summary information of all OSPF
imported routes will be displayed.
Related command: asbr-summary .
Example
# Display the summary information of all OSPF imported routes.
<Quidway> display ospf asbr-summary
OSPF Process 1 with Router ID 1.1.1.1
Summary Addresses
Total summary address count: 2

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English