Huawei Quidway S3900 Series - Display Power; Display Schedule Reboot

Command Manual – System Maintenance and Debugging
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 3 Device Management Commands
Huawei Technologies Proprietary
3-6
Auto-establish enabled
Free Memory: 17067424 (Bytes)
The state information about connection:
The times of disconnect: 0
The times of reconnect: 0
The current state: Normal
3.1.8 display power
Syntax
display power [ unit unit-id [ power-id ] ]
View
Any view
Parameter
unit-id: Unit ID of a switch.
power-id: Power ID.
Description
Use the display power command to view the working state of the power supply of the
switch.
Example
# Display the working state of the power supply.
<Quidway> display power
Unit 1
power 1
State : Normal
Type : AC
The above information indicates that the type of the power is AC, and the power
supplies normally.
3.1.9 display schedule reboot
Syntax
display schedule reboot