Huawei Quidway S3900 Series Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
Huawei Technologies Proprietary
1-20
password: Password you want to set, a character string.
z For simple mode, the password must be in plain text.
z For cipher mode, the password can be either in cipher text or in plain text, which
it is depends on your input.
A password in plain text can be a string with of up to 63 consecutive characters, for
example, aabbcc. A password in cipher text can be a string with 1 to 63 characters, or
88 characters, for example, _(TT8F]Y\5SQ=^Q`MAF4<1!!.
Description
Use the password command to set a password for the local user.
Use the undo password command to cancel the password of the local user.
Note that, after the local-user password-display-mode cipher-force command is
executed, the password will be displayed in cipher text even though you use the
password command to set the display mode of the password to simple.
Related command: display local-user.
Example
# Set the password of user1 to 20030422 and specify to display the password in plain
text.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] local-user user1
New local user added.
[Quidway-luser-user1] password simple 20030422
1.1.19 radius-scheme
Syntax
radius-scheme radius-scheme-name
View
ISP domain view
Parameter
radius-scheme-name: Name of a RADIUS scheme, a character string of up to 32
characters.
Description
Use the radius-scheme command to specify the RADIUS scheme to be used by
current ISP domain.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English