Command Manual - Management VLAN
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Management VLAN Configuration
Commands
Huawei Technologies Proprietary
1-20
undo ip address [ ip-address mask [ sub ] ]
View
VLAN interface view
Parameter
ip-address: IP address to be assigned to the management VLAN interface.
mask: Mask of the IP address to be assigned to the management VLAN interface. The
mask length is expressed as dotted decimal notation or integer in the range of 0 to 32.
sub: Specifies the secondary IP address.
Description
Use the ip address command to assign an IP address (and mask) to a management
VLAN interface.
Use the undo ip address command to remove the IP address assigned to a
management VLAN interface.
Related command: display interface Vlan-interface.
Example
# Assign an IP address (and the mask) to the management VLAN interface. (Assume
that VLAN 1 is the management VLAN.)
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Vlan-interface 1
[Quidway-Vlan-interface1] ip address 192.168.0.39 255.255.255.0
1.1.16 ip host
Syntax
ip host hostname ip-address
undo ip host hostname [ ip-address ]
View
System view
Parameter
hostname: Host name, a character string comprising 1 to 20 characters. The character
string can include letters, numbers, “_”, and “,”, and must contain at least one letter.
ip-address: Host IP address, in dotted decimal notation.
To Next Page
Loading...
