Huawei Quidway S3900 Series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 2 RIP Configuration Commands
Huawei Technologies Proprietary
2-2
System View: return to User View with Ctrl+Z.
[Quidway] rip
[Quidway-rip] undo checkzero
2.1.2 default cost
Syntax
default cost value
undo default cost
View
RIP view
Parameter
value: Default routing cost to be set, ranging from 1 to 16. It is 1 by default.
Description
Use the default cost command to set the default routing cost of imported routes.
Use the undo default cost command to restore the default value.
If no routing cost is specified when you use the import-route command to import
routes from another routing protocol, the routes will be imported with the default routing
cost specified with the default cost command.
Related command: import-route.
Example
# Set the default routing cost of the routes imported from other routing protocols to 3.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] rip
[Quidway-rip] default cost 3
2.1.3 display rip
Syntax
display rip
View
Any view
Parameter
None

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English