Huawei Quidway S3900 Series - Display Ftp Source-Ip; Ftp

Command Manual – FTP and TFTP
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 FTP and TFTP
Huawei Technologies Proprietary
1-15
Password:
230 Logged in successfully
[ftp]
# Terminate the FTP connection without quitting FTP Client view.
[ftp] disconnect
221 Server closing.
[ftp]
1.2.11 display ftp source-ip
Syntax
display ftp source-ip
View
Any view
Parameter
None
Description
Use the display ftp source-ip command to display the source IP address that the FTP
client uses every time it connects with an FTP server. If a source interface is specified
for the FTP client, the IP address of the source interface will be displayed. If neither a
source IP address nor source interface is specified for the FTP client, 0.0.0.0 will be
displayed.
Example
# Display the source IP address that the FTP client always uses to connect with an FTP
server.
<Quidway> display ftp source-ip
The source IP you specified is 192.168.0.1
1.2.12 ftp
Syntax
ftp [ cluster | remote-server [ port-number ] ]
View
User view