Huawei Quidway S3900 Series Command Manual

Command Manual - DLDP
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 DLDP Configuration Commands
Huawei Technologies Proprietary
1-5
Example
# Set the interval of sending advertisement packets to 20 seconds when all the
DLDP-enabled ports are in the Advertisement status.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] dldp interval 20
1.1.5 dldp reset
Syntax
dldp reset
View
System view, Ethernet port view
Parameter
None
Description
In system view:
Use the dldp reset command to reset the DLDP status of all the ports disabled by
DLDP.
In Ethernet port view:
Use the dldp reset command to reset the DLDP status of the current port disabled by
DLDP.
After the dldp reset command is executed, the DLDP status of these ports changes
from disable to active and DLDP restarts to probe the link status of the fiber cables or
copper twisted pairs.
Related command: dldp, and dldp unidirectional-shutdown.
Example
# Reset the DLDP status of all the ports disabled by DLDP.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] dldp reset
1.1.6 dldp unidirectional-shutdown
Syntax
dldp unidirectional-shutdown { auto | manual }

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English