Huawei Quidway S3900 Series - Display Route-Policy

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 4 IP Routing Policy Configuration
Commands
Huawei Technologies Proprietary
4-3
Parameter
ip-prefix-name: Name of the address prefix list to be displayed.
Description
Use the display ip ip-prefix command to display an address prefix list.
Related command: ip ip-prefix.
Example
# Display the information about the address prefix list named p1.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] route-policy policy permit node 1
%New sequence of this list
[Quidway-route-policy] apply tag 100
Table 4-1 Description on the fields of the display ip ip-prefix command
Field Description
name Name of ip-prefix
index Internal sequence number of ip-prefix
conditions Mode: permit or deny
ip-prefix / mask
Address and network segment length of
ip-prefix
GE
Greater-equal value of ip-prefix network
segment length
LE
Less-equal value of ip-prefix network
segment length
4.1.4 display route-policy
Syntax
display route-policy [ route-policy-name ]
View
Any view
Parameter
route-policy-name: Name of the route-policy .to be displayed.