Command Manual – Link Aggregation
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Link Aggregation Configuration
Commands
Huawei Technologies Proprietary
1-10
Description
Use the port link-aggregation group command to add the current Ethernet port to a
manual or static aggregation group.
Use the undo port link-aggregation group command to remove the current Ethernet
port from the aggregation group.
Related command: display link-aggregation verbose.
Example
# Add Ethernet 1/0/1 to aggregation group 22.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Ethernet1/0/1
[Quidway-Ethernet1/0/1] port link-aggregation group 22
1.1.11 reset lacp statistics
Syntax
reset lacp statistics [ interface interface-type interface-number [ to interface-type
interface-number ] ]
View
User view
Parameter
interface-type: Port type
interface-number: Port number
to: Specifies a group of contiguous ports.
Description
Use the reset lacp statistics command to clear LACP statistics on specified port(s),
or on all ports if no port is specified.
Related command: display link-aggregation interface.
Example
# Clear LACP statistics on all Ethernet ports.
<Quidway> reset lacp statistics
To Next Page
Loading...
