Command Manual – IRF Fabric
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 IRF Fabric Commands
Huawei Technologies Proprietary
1-10
Example
# Specify VLAN 2 of the switch as an IRF fabric VLAN .
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] ftm fabric-vlan 2
1.1.10 irf-fabric authentication-mode
Syntax
irf-fabric authentication-mode { simple password | md5 key }
undo irf-fabric authentication-mode
View
System view
Parameter
simple: Uses simple authentication mode.
password: Password for fabric authentication, a string comprising of 1 to 16 characters.
md5: Uses MD5 encryption authentication mode.
key: MD5 key, a string comprising of 1 to 16 characters.
Description
Use the irf-fabric authentication-mode command to configure the authentication
mode for an IRF fabric.
Use the undo irf-fabric authentication-mode command to cancel the IRF fabric
authentication configuration.
By default, no authentication mode is configured on a switch.
Example
# Set the authentication mode of the IRF fabric to simple, with the password "hello".
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] irf-fabric authentication-mode simple hello
1.1.11 reset ftm statistics
Syntax
reset ftm statistics
To Next Page
Loading...
