Huawei Quidway S3900 Series - Display Ntdp Device-List

Command Manual – Cluster
Quidway S3100 Series Ethernet Switches-Release 1510 Chapter 1 HGMPv2 Configuration Commands
Huawei Technologies Proprietary
1-8
Field Description
Timer
Interval to collect topology information
(disable) means that the device is not the
command switch and does not perform
periodical topology collection
Hop Delay
Delay time for the device to forward topology
collection requests
Port Delay
Delay time for a topology-collection request
to be forwarded through a port
Last collection total
time
Time cost during the last collection
1.2.2 display ntdp device-list
Syntax
display ntdp device-list [ verbose ]
View
Any view
Parameter
verbose: Displays the detailed device information.
Description
Use the display ntdp device-list command to display the device information collected
through NTDP.
Example
# Display the device list collected through NTDP.
<Quidway> display ntdp device-list
MAC HOP IP PLATFORM
00e0-fc00-3901 0 100.100.1.1/24 S3900
00e0-fc00-3190 1 16.1.1.1/24 S3900
Table 1-3 Description on the fields of the display ntdp device-list
command
Field Description
MAC MAC address of a device