Huawei Quidway S3900 Series Command Manual

Command Manual – Mirroring
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 Mirroring Commands
Huawei Technologies Proprietary
1-10
View
VLAN view
Parameter
None
Description
Use the remote-probe vlan enable command to configure the current VLAN as the
remote-probe VLAN.
Use the undo remote-probe vlan enable command to configure the remote-probe
VLAN as a normal VLAN.
Before configuring the remote-probe VLAN, make sure that no Access or Hybrid port
belongs to this VLAN. If any Trunk port exists in this VLAN, the port PVID cannot be the
ID of remote-probe VLAN. After setting a VLAN as remote-probe VLAN, it is
recommended that you do not add Access or Hybrid port to the VLAN.
Example
# Configure VLAN 5 as remote-probe vlan.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] vlan 5
[Quidway-vlan5] remote-probe vlan enable
1.2 Mirroring Commands of S3900-SI
1.2.1 display mirror
Syntax
Syntax
display mirror
View
Any view
Parameter
None
Description
Use the display mirror to display the port mirroring settings, including the monitor port,
monitored port and mirroring direction.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English