Huawei Quidway S3900 Series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-5
[Quidway-ospf-1-area-0.0.0.0] authentication-mode md5
3.1.5 default cost
Syntax
default cost value
undo default cost
View
OSPF view
Parameter
value: Default routing cost of external route imported by OSPF, ranging from 0 to
16,777,214. By default, its value is 1.
Description
Use the default cost command to configure the default cost for OSPF to import
external routes.
Use the undo default cost command to restore the default routing cost of external
routes to its default value.
Since OSPF can import external routing information and propagate the information to
the entire autonomous system, routing cost of external routes can influence route
selection and calculation. Therefore, it is necessary to specify the default routing cost
for the protocol to import external routes.
Example
# Specify the default routing cost for OSPF to import external routes as 10.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] ospf 1
[Quidway-ospf-1] default cost 10
3.1.6 default interval
Syntax
default interval seconds
undo default interval
View
OSPF view

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English