Huawei Quidway S3900 Series Command Manual

Command Manual – Centralized MAC Address Authentication
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Centralized MAC Address
Authentication Configuration Commands
Huawei Technologies Proprietary
1-1
Chapter 1 Centralized MAC Address
Authentication Configuration Commands
1.1 Centralized MAC Address Authentication Configuration
Commands
1.1.1 display mac-authentication
Syntax
display mac-authentication [ interface interface-list ]
View
Any view
Parameter
interface-list: List of Ethernet ports. You can specify multiple Ethernet ports by providing
this argument in the form of interface-list = { interface-type interface-number [ to
interface-type interface-number ] } &<1-10>, where &<1-10> means that you can
provide up to 10 port indexes/port index ranges for this argument.
Description
Use the display mac-authentication command to display global information about
centralized MAC address authentication, including:
z The state of centralized MAC address authentication (enabled/disabled)
z Timer settings
z The number of online users
z The MAC addresses in quiet period
z MAC authentication information about each port
Example
# Display the global information about centralized MAC address authentication.
<Quidway> display mac-authentication
mac address authentication is Enabled.
authentication mode is UsernameAsMacAddress
Fixed username:mac
Fixed password:not configured
offline detect period is 300s
quiet period is 60s.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English