Huawei Quidway S3900 Series Command Manual

Command Manual – MSTP
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 MSTP Configuration Commands
Huawei Technologies Proprietary
1-33
View
System view
Parameter
stp: Enables the STP-compatible mode.
mstp: Enables the MSTP mode.
rstp: Enables RSTP-compatible.
Description
Use the stp mode command to set the MSTP operation mode.
Use the undo stp mode command to revert to the default MSTP operation mode.
By default, a switch operates in MSTP mode.
To make a switch compatible with STP/RSTP, MSTP provides following three operation
modes:
STP-compatible mode, where a switch sends out STP BPDU packets
RSTP-compatible mode, where a switch sends out RSTP BPDU packets
MSTP mode, where a switch sends out MSTP BPDU packets
Related command: stp mcheck, stp, stp interface, and stp interface mcheck.
Example
# Configure the switch to operate in STP-compatible mode.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] stp mode stp
1.1.32 stp no-agreement-check
Syntax
stp no-agreement-check
undo stp no-agreement-check
View
Ethernet port view
Parameter
None

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English