Command Manual – Voice VLAN
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 Voice VLAN Configuration Commands
Huawei Technologies Proprietary
1-7
1.1.8 voice vlan mac-address
Syntax
voice vlan mac-address oui mask oui-mask [ description text ]
undo voice vlan mac-address oui
View
System view
Parameter
oui: MAC address to be set. You need to provide this argument in the format of H-H-H.
oui-mask: MAC address mask in the format of H-H-H. This argument specifies the valid
bits of the MAC address.
text: Description string of the MAC address. This argument can contain 1 to 30
characters.
Description
Use the voice vlan mac-address command to set a MAC address used for a voice
VLAN to identify voice devices.
Use the undo voice vlan mac-address command to disable a MAC address from
being used to identify voice devices.
A switch can use up to 16 MAC addresses to identify voice devices, including the five
default OUI addresses (as listed in
Table 1-2). When the number of MAC addresses
reaches 16, you will fail to add new MAC addresses.
Table 1-2 Default OUI addresses of a switch
Number OUI address Vendor
1 0003-6b00-0000 Cisco phone
2 000f-e200-0000 H3C Aolynk phone
3 00d0-1e00-0000 Pingtel phone
4 00e0-7500-0000 Polycom phone
5 00e0-bb00-0000 3Com phone
Related command: display voice vlan oui.
Example
# Set 00aa-bb00-0000 as an OUI address, with the description string being “ABC”.
<Quidway> system-view