Huawei Quidway S3900 Series Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
Huawei Technologies Proprietary
1-76
Example
# Set the quiet timer for the primary server to ten minutes.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] hwtacacs scheme hwt1
[Quidway-hwtacacs-hwt1] timer quiet 10
1.3.18 timer realtime-accounting
Syntax
timer realtime-accounting minutes
undo timer realtime-accounting
View
HWTACACS scheme view
Parameter
minutes: Real-time accounting interval, which is a multiple of 3 in the range 3 to 60
minutes.
Description
Use the timer realtime-accounting command to configure a real-time accounting
interval.
Use the undo timer realtime-accounting command to restore the default interval.
By default, the real-time accounting interval is 12 minutes.
Note that:
z Real-time accounting interval is necessary for real-time accounting. After an
interval value is set, the switch transmits the accounting information of online
users to the TACACS accounting server at intervals of this value.
z The setting of real-time accounting interval depends somewhat on the
performance of the switch and the TACACS server: A shorter interval requires
higher device performance. You are therefore recommended to adopt a longer
interval when there are a large number of users (more than 1000, inclusive). The
following table recommends the real-time accounting intervals for different
numbers of users.
Table 1-7 Recommended intervals for different numbers of users
Number of users Real-time accounting interval (minute)
1 – 99 3
100 – 499 6

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English