Huawei Quidway S3900 Series Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
Huawei Technologies Proprietary
1-45
1.2.16 radius scheme
Syntax
radius scheme radius-scheme-name
undo radius scheme radius-scheme-name
View
System view
Parameter
radius-scheme-name: Name of the RADIUS scheme, a character string of up to 32
characters.
Description
Use the radius scheme command to create a RADIUS scheme and enter its view.
Use the undo radius scheme command to delete the specified RADIUS scheme.
By default, a RADIUS scheme named "system" has already been created in the
system.
Note that:
z All the attributes of the RADIUS scheme "system" take the default values, which
you can see by using the display radius scheme command.
z The RADIUS protocol configuration is performed on a RADIUS scheme basis.
For each RADIUS scheme, you should specify at least the IP addresses and
UDP port numbers of the RADIUS authentication/authorization and accounting
servers, and the parameters required for the RADIUS client to interact with the
RADIUS servers. You should first create a RADIUS scheme and enter its view
before performing other RADIUS protocol configurations.
z A RADIUS scheme can be referenced by multiple ISP domains simultaneously.
z The undo radius scheme command cannot be used to delete the default
RADIUS scheme. In addition, you are not allowed to delete a RADIUS scheme
which is being used by an online user.
Related command: key, retry realtime-accounting, scheme, timer
realtime-accounting, stop-accounting-buffer enable, retry stop-accounting,
server-type, state, user-name-format, retry, display radius scheme and display
radius statistics.
Example
# Create a RADIUS scheme named radius1 and enter its view.
<Quidway> system-view
System View: return to User View with Ctrl+Z.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English