Huawei Quidway S3900 Series Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
Huawei Technologies Proprietary
1-64
user-name user-name: Displays information on buffered stop-accounting requests
according to the user name specified by user-name, a character string of up to 80
characters, excluding forward slashes (/), colons (:), asterisks (*), question marks (?),
less-than signs (<), and greater-than signs (>). Moreover, “@” can appear no more
than once, and the user name (the part before “@”, the user ID) can not exceed 55
characters.
Description
Use the display stop-accounting-buffer command to view information on the
stop-accounting requests buffered in the switch.
Related command: reset stop-accounting-buffer, stop-accounting-buffer enable,
and retry stop-accounting.
Example
# Display the stop-accounting requests buffered in the HWTACACS scheme “hwt1".
<Quidway> display stop-accounting-buffer hwtacacs-scheme hwt1
1.3.4 hwtacacs nas-ip
Syntax
hwtacacs nas-ip ip-address
undo hwtacacs nas-ip
View
System view
Parameter
ip-address: Specifies a source IP address for the switch, which cannot be an all-zero
address, class D address or loopback address.
Description
Use the hwtacacs nas-ip command to specify the source address of the hwtacacs
packet sent from NAS.
Use the undo hwtacacs nas-ip command to restore the default setting.
By default, the source address is not specified, that is, the address of the interface
sending the packet serves as the source address.
Note that:
z By specifying the source address of the hwtacacs packet, you can avoid
destination unreachable packets as returned from the server upon interface

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English