Huawei Quidway S3900 Series - Peer-Public-Key End

Command Manual –SSH Terminal Service
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 SSH Terminal Service
Configuration Commands
Huawei Technologies Proprietary
1-6
View
Any view
Parameter
None
Description
Use the display ssh-server source-ip command to display the current source IP
address specified for the SSH Server. If you specify a source interface for the SSH
Server, the command displays the IP address of the interface. If not, the command
displays 0.0.0.0.
Example
# Display the current source IP address specified for the SSH Server.
<Quidway> display ssh-server source-ip
The source IP you specified is 192.168.1.1
1.1.6 peer-public-key end
Syntax
peer-public-key end
View
Public key view
Parameter
None
Description
Use the peer-public-key end command to return to system view from public key view.
Related command: rsa peer-public-key, public-key-code begin.
Example
# Exit from public key view.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] rsa peer-public-key quidway003
[Quidway-rsa-public-key] peer-public-key end
[Quidway]