Command Manual – Cluster
Quidway S3100 Series Ethernet Switches-Release 1510 Chapter 1 HGMPv2 Configuration Commands
Huawei Technologies Proprietary
1-26
3 member(s) in the cluster, and 0 of them down.
# Display cluster information (assuming that the current switch is a member device).
[aaa_2.3900-3] display cluster
Cluster name:"aaa"
Role:Member
Member number:2
Management-vlan:100
cluster-mac:0180-c200-000a
Handshake timer:10 sec
Handshake hold-time:60 sec
Administrator device mac address:00e0-fc00-3901
Administrator status:Up
Table 1-5 Description on the fields of the display cluster command
Field Description
Cluster name Name of the cluster
Role Cluster role of the switch
Member number Member number of the switch
Handshake timer Value of handshake timer
Handshake hold-time Handshake holdtime
Administrator device mac
address
MAC address of the management
device
Administrator status State of the management device
1.3.12 display cluster candidates
Syntax
display cluster candidates [ mac-address H-H-H | verbose ]
View
Any view
Parameter
mac-address H-H-H: Specifies the MAC address of a candidate device.
To Next Page
Loading...
Need help?
General