Command Manual – Login
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 Login Commands
Huawei Technologies Proprietary
1-23
1.1.24 telnet
Syntax
telnet { hostname | ip-address } [ service-port ]
View
User view
Parameter
hostname: Host name of the remote switch. You can use the ip host command to
assign a host name to a switch.
ip-address: IP address of the remote switch.
service-port: TCP port number of the port that provides Telnet service on the switch.
This argument ranges from 0 to 65,535.
Description
Use the telnet command to Telnet to another switch from the current switch to manage
the former remotely. You can terminate a Telnet connection by pressing <Ctrl + K> or by
executing the quit command.
The default TCP port number is 23.
Related command: display tcp status, and ip host.
Example
# Telnet to the switch with the host name of Quidway2 and IP address of 129.102.0.1
from the current switch (with the host name of Quidway1).
<Quidway1> telnet 129.102.0.1
Trying 129.102.0.1 ...
Press CTRL+K to abort
Connected to 129.102.0.1 ...
<Quidway2>
1.1.25 telnet-server source-interface
Syntax
telnet-server source-interface interface-type interface-number
undo telnet-server source-interface
View
System view
To Next Page
Loading...
