Huawei Quidway S3900 Series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 5 Route Capacity Configuration
Commands
Huawei Technologies Proprietary
5-2
Table 5-1 Description on the fields of the display memory command
Field Description
Unit Specifies a Unit ID
System Available Memory(bytes) Free memory size, in bytes, of the switch
System Used Memory(bytes)
Occupied memory size, in bytes, of the
switch
Used Rate Memory occupation rate
5.1.2 display memory limit
Syntax
display memory limit
Mode
Any view
Parameter
None
Description
Use the display memory limit command to display the memory setting and state
information related to route capacity.
This command displays the current memory limit configuration, free memory, and state
information about connections, such as times of disconnection, times of reconnection,
and whether the current state is normal.
Example
# Display the current memory setting and state information.
<Quidway> display memory limit
Current memory limit configuration information:
system memory safety: 5 (MBytes)
system memory limit: 4 (MBytes)
auto-establish enabled
Free Memory: 17506496 (Bytes)
The state information about connection:
The times of disconnect: 0
The times of reconnect: 0

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English