Huawei Quidway S3900 Series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 5 Route Capacity Configuration
Commands
Huawei Technologies Proprietary
5-3
The current state: Normal
The information displayed by this command includes Ethernet switch memory limit,
size of free memory, times of disconnection, times of reconnection, and the current
state.
The following table describes the fields of the command:
Table 5-2 Description on the fields of the display memory limit command
Field Description
memory safety Safety value of the switch memory.
memory limit Lower limit of the switch memory.
memory auto-establish enabled
Automatic connection restoration is
enabled (If automatic connection
restoration is disabled, "auto-establish
disabled" is displayed).
Free Memory Size of the current free memory in bytes
The times of disconnect: 0
The times of the disconnection of the
routing protocol is 0.
The times of reconnect: 0
The times of reconnection of the routing
protocol is 0.
The current state: Normal
The current state is normal (If the current
state is emergent, "Exigence" is
displayed).
5.1.3 memory auto-establish disable
Syntax
memory auto-establish disable
View
System view
Parameter
None
Description
Use the memory auto-establish disable command to disable the automatic
restoration of routing protocol connection (even if the free memory recovers to a safety
value).

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English