Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
Huawei Technologies Proprietary
1-14
default: Manually configures the default ISP domain, which is "system" by default.
There is one and only one default ISP domain.
disable: Disables the configured default ISP domain.
enable: Enables the configured default ISP domain.
Description
Use the domain command to create an ISP domain and enter its view, or enter the
view of an existing ISP domain, or configure the default ISP domain.
Use the undo domain command to delete a specified ISP domain.
By default, an ISP domain "system" has already existed in the system, and you can
use the display domain command to check the settings of this default ISP domain.
After you execute the domain command, the system creates a new ISP domain if the
specified ISP domain does not exist. Once an ISP domain is created, it is in the active
state. You can manually configure the default domain only when it has already
existed.
Related command: access-limit, scheme, state and display domain.
Example
# Create a new ISP domain aabbcc.net.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] domain aabbcc.net
New Domain added.
[Quidway-isp-aabbcc.net]
1.1.12 idle-cut
Syntax
idle-cut { disable | enable minute flow }
View
ISP domain view
Parameter
disable: Inhibits users from enabling the idle-cut function.
enable: Allows users to enable the idle-cut function.
minute: Maximum idle time, ranging from 1 minute to 120 minutes.
flow: Minimum data flow, ranging from 1 byte to 10,240,000 bytes.
To Next Page
Loading...
Need help?
General