Huawei Quidway S3900 Series Command Manual

Command Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 3 Multicast MAC Address Entr
y
Configuration Commands
Huawei Technologies Proprietary
3-1
Chapter 3 Multicast MAC Address Entry
Configuration Commands
3.1 Multicast MAC Address Entry Configuration Commands
3.1.1 mac-address multicast interface
Syntax
mac-address multicast mac-address interface interface-list vlan vlan-id
undo mac-address multicast [ mac-address [ interface interface-list ] vlan vlan-id ]
View
System view
Parameter
mac-address: Multicast MAC address.
vlan-id: VLAN ID.
interface-list: Forwarding port list, in the format of { { interface-type interface-num } [ to
{ interface-type interface-num } ] }&<1-10>. Where, interface-type is a port type,
interface-number is a port number (refer to the parameter description of the interface
command in the port command module of this document), to is used to specify a port
range, and &<1-10> represents you can totally specify up to 10 ports and port ranges.
Description
Use the mac-address multicast command to manually add a multicast MAC address
entry.
Use the undo mac-address multicast command to remove a multicast MAC address
entry.
Each multicast MAC address entry contains: multicast address, forward port, VLAN ID,
and so on.
Related command: display mac-address multicast static.
Example
# Add a multicast MAC address entry, with multicast address 0100-5e0a-0805, forward
port Ethernet 1/0/1, and VLAN 1 to which the entry belongs.
<Quidway> system-view
System View: return to User View with Ctrl+Z.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English