Command Manual – Cluster
Quidway S3100 Series Ethernet Switches-Release 1510 Chapter 1 HGMPv2 Configuration Commands
Huawei Technologies Proprietary
1-39
Description
Use the tftp put command to upload the file in the switch to the specified directory in
the TFTP server.
Related command: tftp cluster get.
Example
# Upload the file named vrpcfg.txt in the switch to the public TFTP server of the cluster
and save it as temp.txt.
<123_1.Quidway> tftp cluster put vrpcfg.txt temp.txt
1.3.25 tftp-server
Syntax
tftp-server ip-address
undo tftp-server
View
Cluster view
Parameter
ip-address: IP address of a TFTP server to be configured for a cluster.
Description
Use the tftp-server command to configure a TFTP server for cluster members on the
management device.
Use the undo tftp-server command to cancel the TFTP server of the cluster members.
By default, no TFTP server is configured.
You need to configure the IP address of the TFTP server for the cluster, in order that the
member devices in the cluster can access the TFTP server through the management
device.
Execute these two commands on management devices only.
Example
# Configure a TFTP server on the management device.
<aaa_0.Quidway> system-view
System View: return to User View with Ctrl+Z.
[aaa_0.Quidway] cluster
[aaa_0.Quidway-cluster] tftp-server 1.0.0.9
To Next Page
Loading...
Need help?
General