Huawei Quidway S3900 Series Command Manual

Command Manual – SNMP and RMON
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 SNMP Configuration Commands
Huawei Technologies Proprietary
1-20
Parameter
size: Length of a queue, ranging from 1 to 1,000.
Description
Use the snmp-agent trap queue-size command to configure the information queue
length of Trap packet sent to destination host.
Use the undo snmp-agent trap queue-size command to restore the default value.
Related command: snmp-agent trap enable, snmp-agent target-host and
snmp-agent trap life.
By default, the length is 100.
Example
# Configure the queue length to 200.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] snmp-agent trap queue-size 200
1.1.22 snmp-agent trap source
Syntax
snmp-agent trap source interface-type interface-number
undo snmp-agent trap source
View
System view
Parameter
nterface-type: Interface type.
interface-number: Interface number.
Description
Use the snmp-agent trap source command to configure the source address for
sending Trap message.
Use the undo snmp-agent trap source command to cancel the source address for
sending Trap message.
The SNMP Trap message sent from a server has a source IP address no matter which
interface the Trap message is sent from.
By default, SNMP chooses an outgoing interface.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English