Huawei Quidway S3900 Series - Display Rmon Statistics

Command Manual – SNMP and RMON
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 2 RMON Configuration Commands
Huawei Technologies Proprietary
2-7
Field Description
Falling threshold
Falling threshold. An alarm is triggered when the
falling threshold is reached
linked with event Event index corresponding to an alarm
When startup enables:
risingOrFallingAlarm
Alarm startup type:
risingOrFallingAlarm (an alarm is triggered when
the rising or falling threshold is reached)
risingAlarm (an alarm is triggered when the rising
threshold is reached)
FallingAlarm (an alarm is triggered when the
falling threshold is reached)
This entry will exist: forever
Existing period. This entry can exist forever or
exist in the specified cycle
Latest value Latest sampled value
2.1.6 display rmon statistics
Syntax
display rmon statistics [ interface-type interface-number | unit unit-number ]
View
Any view
Parameter
interface-type: Interface type.
interface-number: Interface number.
unit unit-number: Specifies a unit number.
Description
Use the display rmon statistics command to display the RMON statistics of a
specified port.
The displayed information include the number of the following items: collisions, packets
with CRC errors, undersize or oversize packets, broadcast packets, multicast packets,
received bytes, and received packets.
Related command: rmon statistics.
Example
# Display the RMON statistics information.
<Quidway> display rmon statistics Ethernet 1/0/1