Huawei Quidway S3900 Series Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
Huawei Technologies Proprietary
1-65
failure. The source address is normally recommended to be a loopback interface
address.
z This command specifies only one source address; therefore, the newly
configured source address may overwrite the original one.
Related command: nas-ip.
Example
# Configure the router to send hwtacacs packets from 129.10.10.1.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] hwtacacs nas-ip 129.10.10.1
1.3.5 hwtacacs scheme
Syntax
hwtacacs scheme hwtacacs-scheme-name
undo hwtacacs scheme hwtacacs-scheme-name
View
System view
Parameter
hwtacacs-scheme-name: Specifies an HWTACACS server scheme, with a character
string of up to characters.
Description
Use the hwtacacs scheme command to create an HWTACACS scheme and enter its
view.
Use the undo hwtacacs scheme command to delete the HWTACACS scheme.
By default, no HWTACACS scheme exists.
 Note:
If Fabric is enabled on the switch, you cannot create an HWTACACS scheme
because they are exclusive to each other.
Example
# Create an HWTACACS scheme named "hwt1" and enter the relevant HWTACACS
view.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English