Huawei Quidway S3900 Series - Resilient-Arp Interface Vlan-Interface

Command Manual – ARP
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 2 Resilient ARP Configuration
Commands
Huawei Technologies Proprietary
2-2
undo resilient-arp enable
View
System view
Parameter
None
Description
Use the resilient-arp enable command to enable the Resilient ARP function.
Use the undo resilient-arp enable command to disable the Resilient ARP function.
By default, the Resilient ARP function is enabled.
Related command: display resilient-arp.
Example
# Enable the Resilient ARP function.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] resilient-arp enable
2.1.3 resilient-arp interface vlan-interface
Syntax
resilient-arp interface Vlan-interface vlan-id
undo resilient-arp interface Vlan-interface vlan-id
View
System view
Parameter
vlan-id: VLAN interface ID.
Description
Use the resilient-arp interface Vlan-interface command to configure the VLAN
interface through which Resilient ARP packets are sent.
Use the undo resilient-arp interface Vlan-interface command to remove the VLAN
interface through which Resilient ARP packets are sent.
By default, Resilient ARP packets are sent through the VLAN 1 interface.
Related command: display resilient-arp.