Huawei Quidway S3900 Series Command Manual

Command Manual - Port Isolation
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Port Isolation Configuration
Commands
Huawei Technologies Proprietary
1-1
Chapter 1 Port Isolation Configuration Commands
1.1 Port Isolation Configuration Commands
1.1.1 display isolate port
Syntax
display isolate port
View
Any view
Parameter
None
Description
Use the display isolate port command to display the information about the Ethernet
ports added to an isolation group.
Example
# Display the information about the Ethernet ports added to the isolation group.
<Quidway> display isolate port
Isolated port(s) on UNIT 1:
Ethernet1/0/2, Ethernet1/0/3, Ethernet1/0/4
The information above shows that Ethernet1/0/2, Ethernet1/0/3, and Ethernet1/04 are
in the isolation group.
1.1.2 port isolate
Syntax
port isolate
undo port isolate
View
Ethernet port view
Parameter
None

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English